Yokomo DP-YD2S – Drift Package YD-2S RWD Chassis Kit met GYRO YG-302
DP-YD2S – Drift Package YD-2S RWD Chassis Kit met GYRO
One-piece resin chassis specification superior in ease of handling appears in the lineup of YD – 2 S, which has a high rear traction with a high mount motor and a high usage rate on low grip road surfaces such as P tiles and concrete!
YD-2 series The original RWD drift-only front steering system and the high-mount motor specification 4-gear transmission are mounted on a one-piece main chassis that delivers supple feeling with vibration absorption and moderate torsional rigidity. Suppress the hooking of the front tire and pull out the moistened run like a real car. High mount motors pull out effective rolls especially on low grip road surface, and it is possible to travel with high stability even in slippery conditions. Reasonable price has also been realized by making vehicle height adjustable oil shock and shock tower made of resin.
- Length: 425mm
- Width: 198mm
- Wheelbase: 256mm
- Second reduction rate: 1:2.6
- Over all weight: 1500g
- High mount motor
- 4 Gear rear transmission
- New designed, Sealed gear box
- 4 wheel independent double wishbone suspension
- SLF aluminum big bore oil dumber
- Plastic main chassis
- Adjustable aluminum motor mount system
- RWD high angle steering system
- 49mm bone rear universal shaft
- Narrow scrub steering block
- Wide/Narrow rear diffuser
The highlight of YD-2S is the high mount motor layout as a results of new gear box development. Conventional high mount motor layout on YD-2 has been driven by third party conversions, however those are too much height since they just re-layout the motor position by adding high priced carbon made parts with ridiculous appearance.
Too much higher role center delivered the disadvantages on performance as well, such as slow acceleration at the corner exit, and it is not easy to drive at the competition track. YD-2S enable to select 3 kind of motor positions in order to suits for the best role center to deliver the best rear traction in several kind of slippery environments.
Fully new designed 4 transmission could squeeze into the bottom of motor, and it is the type to increase the rear traction as rotational torque goes up, supreme to low friction surface track. Rear differential has 4 pinion gear.
Since the motor layout can be changed by selecting from 3 rotate positon at motor mount plate, the weight balance of car will be also adjustable to find out the best setting for keeping supreme angle and speed in any kind of slippery surface condition.
The battery is limited to Shorty LiPo battery, but the mounting layout will have 4 different positions by selecting battery stopper location on the chassis. The layout will be Vertical, Horizontal Front/Mid/Rear in order to complete the fine tuning on weight balance and forward/backward traction.
Steering around are the same as conventional YD-2 series. The best Ackerman rate fill deliver the front driven running. Aluminum option parts are the co-usable among YD-2 series.
The pictures are the assembled samples on prototype. It may changes at the production version without notice.
The kit does not include body, wheels, tires, motor, batteries ,pinion gear, and other R/C electrics.